The PESB solenoid valve includes the self-cleaning pilot filter scrubber inside the valve; this keeps the inlet to the diaphragm clean in applications where the incoming water is dirty and might otherwise prevent valves from opening & closing reliably.
The PESB valve is the strongest of Rainbird’s solenoid valves (rated to 13.8 bar) and is constructed of glass-filled nylon.
Note that if you are replacing a PESB solenoid valve in an existing IC system, the wires protruding from the IC coil should be one red and one black.
The PESB solenoid valve includes the self-cleaning pilot filter scrubber inside the valve; this keeps the inlet to the diaphragm clean in applications where the incoming water is dirty and might otherwise prevent valves from opening & closing reliably.
The PESB valve is the strongest of Rainbird’s solenoid valves (rated to 13.8 bar) and is constructed of glass-filled nylon.
Note that if you are replacing a PESB solenoid valve in an existing IC system, the wires protruding from the IC coil should be one red and one black.
The PESB solenoid valve includes the self-cleaning pilot filter scrubber inside the valve; this keeps the inlet to the diaphragm clean in applications where the incoming water is dirty and might otherwise prevent valves from opening & closing reliably.
The PESB valve is the strongest of Rainbird’s solenoid valves (rated to 13.8 bar) and is constructed of glass-filled nylon.
Note that if you are replacing a PESB solenoid valve in an existing IC system, the wires protruding from the IC coil should be one red and one black.
Trade Enquires
Our website makes it convenient to order small quantities of our products. If you require larger quantities or advice from our experts you can get in touch to speak to one of our representatives.
Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance.
Globe configuration.
Normally closed, forward flow design.
Slow closing to prevent water hammer and subsequent system damage.
Low flow capability for a wide range of applications.
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
Flow control handle adjusts water flows as needed.
Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.
Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only).
Five-year trade warranty.
Specs
Pressure: 20 to 200 psi (1,4 to 13,8 bar)
Flow without PRS-D option: 0.25 to 200 GPM (0,06 to 45 m³/h; 0,02 to 12,60 l/s)
Flow with PRS-D option: 5 to 200 GPM (1,14 to 45 m³/h; 0,32 to 12,60 l/s)
Temperature: Up to 150°F (66°C)
Options
Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance. Regulates up to 100 psi (6,9 bar)
Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1″); PEB-NP-HAN2 (1½” and 2″).
Dimensions
150-PEB: 8″ x 6″ x 6″ – (20,3 cm) x (15,2 cm) x (15,2 cm)
This site requires cookies to provide basic functionality and collect statistical information to allow us to improve our site. By continuing you are consenting to the use of these cookies. Read more about how we use cookies.
