Product works immediately removing oil contamination and starting bioremediation process
Pack contains sprayer, 1 l pack of Remediact and 4 l pack of FleetKleen
Apply product using a suitable pressure /knapsack sprayer. Dilute 100ml of product with 2 litres of water to treat 10 m² of surface. Agitate well.
Spray area to be cleaned/decontaminated with 2.1 litres of spray solution per 10 m² of surface – leave for minimum of 5 minutes. For heavier stains or larger spills leave area wet for longer.
Scrub area with stiff brush or broom. Wash residue into interceptor drains.
Automated Pressure Washers/Scrubber Dryer
Product must be applied at a minimum of 30 parts of water to 1 part FleetKleen to avoid foaming.
Apply 3.1 litres of solution per 10 m² of contaminated surface.
Use pressure jet to aerate and agitate FleetKleen solution. Leave for minimum of 5 minutes. Wash residue into interceptor drains.