Description

You can purchase your water storage tanks from Origin Amenity Solutions. Whether you need a 1,000 litre tank for a small landscape project or 90,000 litres (20,000 gallons) for a golf course, we can help.

We use Enduramaxx primarily. These tanks are constructed of polypropylene and are fully enclosed with a screwed vented manhole lid.

Compared with corrugated steel tanks they are very simple to install and will last for decades. They don’t have a rubber liner that will need replacing, they don’t rust and they cost significantly less. Installation will take a few hours… not days. You can install them yourself. No need for thousands of £ in contractor installation costs!

The largest polypropylene tank is 30,000 litres (6,600 gallons). If you need more volume then it is very simple to have 2 or more tanks installed in parallel; sit them beside each other. So long as they are at the same ground level the connecting suction pipe going to your pump will balance them out (as long as you don’t have a non-return valve between them). Just connect your tank-fill pipe to one tank & the other/s will fill, or balance, naturally.

Polypropylene tanks are also easy to fit into the right position; you can even roll them (carefully) into position before standing them up into their final position.

We also have tank connection fittings, so if you want to make a hole; for example for your tank-fill inlet pipe, then simply use a hole-saw and then a tank fitting. These are available up to 3” BSP diameter. We also stock ballcocks & floats.

All our Enduramaxx tanks come complete with a 2” threaded outlet complete with a 2” Hansen ball valve.