Description
DAB DTron submerged pump
DAB DTron 35/120 submerged pump (IRR‑DTRON2‑35/120)
SKU:IRR-DTRON2-35/120
DAB Dtron pumps are the evolution of submersible pumps. For flow rates up to 80 litres per minute (at 2 bar delivery pressure) this range of pumps can be dropped into your water storage tank and left to operate fully automatically.
- Perfect for landscape irrigation.
- 7” (185mm) diameter x 611mm tall submersible pump which can also operate as a dry pump (using DOC68 accessory sold separately).
- The DTron2 is the basic model, while the DTron3 has a few extra bells & whistles and can be controlled remotely & even via a smart phone app!
- Can be installed vertically or horizontally.
- Both models have a Technopolymer pump body, 304 stainless motor.
- The pump will turn on & off automatically, based on the delivery pressure. Pre-set cut-in at 2.4 bar pressure.
- They are perfect for landscape irrigation systems including being installed inside compact water storage tanks.
- With the DOC68 docking system, the same pump can be used outside the tank to pump like a normal dry dock pump.
- Minimum water level 35mm. Can be installed semi-submerged or fully submerged (up to 15 metres deep).
- With the float level addition, it will switch off if the water level in the tank gets too low.
- Includes an integrated pressure vessel: this provides protection from water hammer & unnecessary restarting.
- Integrated non-return valve so it won’t lose prime.
- Integrated debris filter which can be removed for cleaning.
- Asynchronous submersible water-cooled motor. Anti-overheating motor for thermal protection.
- Built-in Bleed Valve for manual priming upon the initial installation to allow any trapped air to escape.
- 1 1/4” female BSP outlet on the top of the pump.
Power 240vac single phase.
DAB DTron 35/120 submerged pump (IRR‑DTRON2‑35/120)
DAB Dtron pumps are the evolution of submersible pumps. For flow rates up to 80 litres per minute (at 2 bar delivery pressure) this range of pumps can be dropped into your water storage tank and left to operate fully automatically.
- Perfect for landscape irrigation.
- 7” (185mm) diameter x 611mm tall submersible pump which can also operate as a dry pump (using DOC68 accessory sold separately).
- The DTron2 is the basic model, while the DTron3 has a few extra bells & whistles and can be controlled remotely & even via a smart phone app!
- Can be installed vertically or horizontally.
- Both models have a Technopolymer pump body, 304 stainless motor.
- The pump will turn on & off automatically, based on the delivery pressure. Pre-set cut-in at 2.4 bar pressure.
- They are perfect for landscape irrigation systems including being installed inside compact water storage tanks.
- With the DOC68 docking system, the same pump can be used outside the tank to pump like a normal dry dock pump.
- Minimum water level 35mm. Can be installed semi-submerged or fully submerged (up to 15 metres deep).
- With the float level addition, it will switch off if the water level in the tank gets too low.
- Includes an integrated pressure vessel: this provides protection from water hammer & unnecessary restarting.
- Integrated non-return valve so it won’t lose prime.
- Integrated debris filter which can be removed for cleaning.
- Asynchronous submersible water-cooled motor. Anti-overheating motor for thermal protection.
- Built-in Bleed Valve for manual priming upon the initial installation to allow any trapped air to escape.
- 1 1/4” female BSP outlet on the top of the pump.
Power 240vac single phase.
DAB DTron 35/120 submerged pump (IRR‑DTRON2‑35/120)
Ex VAT:£763.32Incl VAT:£915.98
DAB Dtron pumps are the evolution of submersible pumps. For flow rates up to 80 litres per minute (at 2 bar delivery pressure) this range of pumps can be dropped into your water storage tank and left to operate fully automatically.
- Perfect for landscape irrigation.
- 7” (185mm) diameter x 611mm tall submersible pump which can also operate as a dry pump (using DOC68 accessory sold separately).
- The DTron2 is the basic model, while the DTron3 has a few extra bells & whistles and can be controlled remotely & even via a smart phone app!
- Can be installed vertically or horizontally.
- Both models have a Technopolymer pump body, 304 stainless motor.
- The pump will turn on & off automatically, based on the delivery pressure. Pre-set cut-in at 2.4 bar pressure.
- They are perfect for landscape irrigation systems including being installed inside compact water storage tanks.
- With the DOC68 docking system, the same pump can be used outside the tank to pump like a normal dry dock pump.
- Minimum water level 35mm. Can be installed semi-submerged or fully submerged (up to 15 metres deep).
- With the float level addition, it will switch off if the water level in the tank gets too low.
- Includes an integrated pressure vessel: this provides protection from water hammer & unnecessary restarting.
- Integrated non-return valve so it won’t lose prime.
- Integrated debris filter which can be removed for cleaning.
- Asynchronous submersible water-cooled motor. Anti-overheating motor for thermal protection.
- Built-in Bleed Valve for manual priming upon the initial installation to allow any trapped air to escape.
- 1 1/4” female BSP outlet on the top of the pump.
Power 240vac single phase.
Trade Enquires
Our website makes it convenient to order small quantities of our products. If you require larger quantities or advice from our experts you can get in touch to speak to one of our representatives.
Got a question or need a quote?
